Skip to main content

Push-to-talk

Push-to-talk turns MonoPhone into a two-way radio for your team: hold the talk button and everyone in the channel hears you at once, without a call to answer. Only one person talks at a time. Your administrator decides which channels you are in and whether you can talk or only listen (see Push-to-talk channels).

Find your channels​

Open Settings > Push-to-talk. Each channel shows who is talking right now, or how many members it has and how many of them are in the channel now (for example "12 members · 3 joined now"); the channel's screen shows the same counts. A channel your administrator switched off is marked as such; you cannot talk in it.

The Everyone channel​

Your company has a channel for everyone, usually called Everyone (in your company's language). After you sign in, MonoPhone joins it by itself, so you hear your colleagues straight away:

  • Android: the push-to-talk notification appears with the channel's name.
  • iPhone: the channel appears in the iPhone's push-to-talk interface. Because the iPhone is in one channel at a time, the app joins Everyone only when you are not in another channel already.

Don't want it? Tap Leave. The app remembers this on that phone or computer and does not join Everyone by itself again. To come back, open the channel in Settings > Push-to-talk. Your administrator may have renamed the channel, switched it off or removed it.

Talk and listen​

  1. Tap a channel to join it. You hear everyone who talks in it from now on.
  2. Hold the big talk button and speak. You hear a short beep when you may start; what you say is sent while you hold the button. Let go to stop.
  3. You can also tap the button once to start and tap it again to stop.

While you talk the screen counts down the channel's talk limit (30 seconds unless your administrator set another). When the time is up, the channel is freed for the others.

  • Someone else is talking. You hear them and see their name. If you press talk, the app tells you who is talking: wait until they finish.
  • A supervisor took over. Supervisors can interrupt for an urgent message. Your transmission ends and the app tells you.
  • Recorded channels show "This channel is recorded." Your administrator can listen to the recordings later.
  • Recent lists the last transmissions of the channel: who talked, when and for how long.

You stay in the channel when you leave the screen or lock the phone. Tap Leave on the channel's screen (or in the notification on Android) to stop hearing it.

Android​

  • A notification stays while you are in a channel, also on the lock screen. Its Talk button starts talking and the same button (Stop talking) ends it; Leave leaves the channel.
  • When someone starts talking and the app is closed, the phone wakes up and plays the message, even with the screen locked. To talk after such a wake, open the app once: Android allows the microphone in the background only to an app that was opened.
  • Talk keys. On the channel's screen, under Talk keys:
    • Phone's talk key: the dedicated talk key of rugged phones. Turn it on, then choose MonoPhone for the key in the phone's own button settings. It works with the screen locked.
    • Headset and Bluetooth buttons: the play or call button of a wired or Bluetooth headset, and Bluetooth talk buttons that send standard media keys. On by default.
    • Volume key: choose the volume up or volume down key as the talk key while the app is open.
  • Every key works both ways: hold it to talk while it is down, or press it briefly to start and again to stop.

iPhone​

MonoPhone uses the iPhone's own push-to-talk system, so a channel works like a walkie-talkie even when the app is closed.

  • Join a channel in the app (the iPhone needs the app open to join). The channel then appears at the top of the screen and on the lock screen, with a Talk button and a Leave button. You stay in the channel after a restart of the phone.
  • Talk from anywhere. Hold or tap Talk on the lock screen, in the Dynamic Island or in the app. You hear the iPhone's start sound when you may speak. Tap again (or let go) to stop.
  • Hear the others with the app closed. When someone starts talking, the iPhone wakes MonoPhone, shows who is talking and plays the message, also with the screen locked.
  • Headsets and Bluetooth talk buttons that work with the iPhone's push-to-talk system start and stop talking too.
  • One channel at a time. The iPhone keeps one push-to-talk channel joined. Joining another channel in the app leaves the previous one. While you are in a channel, messages in your other channels are not played, and the iPhone is not woken for them: open the app to see who is talking there.
  • Phone calls come first. During a call you cannot talk in the channel.
  • Leave on the lock screen or in the app stops the channel on the iPhone.

The first time you talk, the iPhone asks for the microphone. If you refused it, allow it in Settings > MonoPhone > Microphone.

Apple Watch​

When you are in at least one channel, the watch app has a Push-to-talk page. Pick a channel, then hold the round button and speak; let go to stop. You feel a tap when you may start.

Works without the iPhone. The watch signs in once, when you set it up from the iPhone, and then keeps its own sign-in. A watch with its own mobile plan (LTE) or on a known Wi-Fi network talks and listens with the iPhone far away, switched off or left at home. The page shows how the watch is connected: Wi-Fi, Mobile data or Via iPhone.

  • Talking and listening work while the Push-to-talk page of the channel is on the screen. The watch uses its own microphone and speaker (or connected headphones).
  • When the app is closed, the watch cannot play a message by itself: watchOS does not allow it. Instead, when someone starts talking in one of your channels, the watch shows a notification ("Ann is talking"). Tap it and the channel opens; you hear what is still being said and can answer. Short messages can be over before you tap, so check Recent in the app. The watch is woken for every channel you are in, also when the iPhone has joined only one. Allow notifications for MonoPhone on the watch, and keep sound on.
  • Raising your wrist. With the wrist down, watchOS may pause the app and the channel disconnects. The watch reconnects by itself when you raise your wrist.
  • Wi-Fi and mobile data change. When you walk out of Wi-Fi range onto mobile data (or back), the channel reconnects by itself within a few seconds. A message in progress may be cut. Reconnecting… is shown meanwhile.
  • No network. No connection is shown and the channel reconnects when the watch is online again. If the server cannot be reached after several tries, the page says Can't reach server; tap Try again.

Mobile data needs a cellular Apple Watch with an active plan (the watch's own, with your carrier). Your administrator's server must be reachable from the internet; a server that is reachable only inside the company network (or over a VPN on the iPhone) cannot be reached by the watch when the iPhone is away.

Desktop app​

The channel's screen has the same talk button: hold it with the mouse, or click once to start and again to stop. Under Talk keys choose a keyboard shortcut (Ctrl+Shift+Space by default, or F8, F9, Ctrl+Alt+T): while a channel is open, the shortcut talks from any app. Hold it to talk, or press it briefly to start and again to stop. Choose No talk key if the shortcut clashes with another app.

Talking works in the Mac app. The Windows and Linux apps show the channels, who is talking and the recent transmissions; talking there arrives with a later update.

Shortcuts, controls and tiles​

You can start talking without looking for the channel first:

  • iPhone: say "Push to talk in MonoPhone" (or "Talk on Warehouse in MonoPhone"), put the Push to talk action on the Action button, or add the Push to talk control to Control Center or the Lock Screen (iOS 18 and later). Each one opens MonoPhone on the channel and starts talking; use it again to stop.
  • iPhone widgets (iOS 17 and later): add the Push to talk widget to the Home Screen or the Lock Screen. Each Talk button opens MonoPhone on its channel and starts talking; press it again while you talk to stop.
    • Small: one channel (its name, who is talking, one Talk button).
    • Medium and large: with one channel, one big Talk button; with several, a row per channel (two in medium, up to five in large) with the channel's name, how many people are in it and who is talking, and a Talk button each.
    • Lock Screen: the circle is a single Talk button, the rectangle shows the channel, who is talking and Talk.
    • To choose the channels, touch and hold the widget, tap Edit Widget and pick Channels (the first one is used by the small widget and the Lock Screen). Left empty, the widget shows all your channels in the order of the app, as many as fit.
    • The iPhone is in one push-to-talk channel at a time: the Talk button of another channel leaves the joined channel and joins that one, like choosing it in the app.
  • Apple Watch: add the Push to talk complication to the watch face, or the widget to the Smart Stack. Touch and hold the face or the widget and choose the Channel it shows (left empty, the first channel you may talk in). The rectangular widget lists two channels, with who is talking in each. Tapping a channel opens the watch app on the Push-to-talk page of that channel, where you hold the round button to talk.
  • Android: add the Push to talk Quick Settings tile, touch and hold the app icon and choose Push to talk, or say "Open push to talk in MonoPhone".

Without a chosen channel they use the channel you have open, or else the first channel you may talk in. See MonoPhone mobile app for how to add them.

Good to know​

  • Your microphone is only used while you talk. Android and iPhone show their usual microphone indicator while it is open.
  • On the iPhone, leave the channel when you do not want to be woken: the app still shows your channels and who is talking.
  • Push-to-talk needs a connection to your company's phone system. If the connection drops, the app reconnects on its own and shows "Connecting…" meanwhile.
  • If the app cannot connect to the channel, the channel's screen says so ("Can't connect to the channel") and keeps trying; tap Try again to try at once. If the phone system says you are not a member of the channel, or refuses the connection, the app stops trying and tells you; ask your administrator.
  • Leave always works, also while the app is still connecting or cannot connect.
  • During a phone call, talk in the channel only when you are not speaking on the call: both use the same microphone.