Call assistant
The call assistant answers the calls you choose, asks the caller who they are and what the call is about, and then does what you told it: it rings you with a short whisper ("Call from Ana about the invoice"), takes a message, hands the call to your voicemail, sends it to a colleague, or declines politely. Every user of the company can have one. It uses your company's own AI and speech providers, and an administrator can switch it off or limit it (see Call assistant policy).
Turning it on
Your assistant is off until you turn it on. Pick one of the modes:
| Mode | What happens |
|---|---|
| Screen unknown callers (default) | People you know, colleagues and VIP callers ring straight through. Unknown and withheld callers are asked who they are and why they call. |
| Do not disturb | Everyone is asked and a message is taken. Only favourites and VIP callers ring through. |
| Business | A front-desk greeting with your hours; after hours the caller can leave a message. |
| Only spam | Calls ring as usual. Only suspected spam and sales calls are handled by the assistant; if you do not answer, it takes a message instead of voicemail. |
| Smart | The mode follows your state: Only spam while you are available, Do not disturb while you are in a meeting, away, on Do not disturb or outside your hours. |
Each mode comes with ready-made rules, so one tap is enough. Calls from colleagues are not screened unless you turn on Screen colleagues too.
In the MonoPhone app
Open Settings > My assistant (or tap the Assistant pill at the top of Calls and Messages while it is on).
- Turn on my assistant sets it up in three taps: the button, a style (one of the mode cards), then Turn on under the voice. You can listen to each voice before you pick it, or keep the default.
- The assistant card shows one big switch with a coloured ring: grey when it is off, your accent colour when it is on, amber while it is paused or when your minutes for the month are used up (calls then ring normally). Under it are the mode cards (Screen unknown, Do not disturb, Business, Spam only, and Smart when your company offers it), three small counters for today (Screened, Messages, Blocked) and Pause for 1 h / Until tomorrow with a countdown and Resume. A mode your company does not offer shows a lock.
- Customise holds the voice, the name it says and a note for callers, its wording, how long your phones ring first, Screen colleagues too, the rules (switch a rule off, drag to reorder, swipe to remove, add one, or start again from a template), your VIP callers, your blocked and silenced numbers, Recognise my phone contacts, Announce the assistant to callers and the notifications. To try it, call your number from a phone that is not in your contacts or VIP callers.
More automations
When you add a rule, the form has two groups, When and Then, and the Add button stays dimmed until the rule is complete. The settings of an automation sit under one Settings header above Turn on.
In MonoPhone, open Assistant > More automations for ready-made helpers, such as texting people back after a missed call. Each row says whether it is ready or needs something first. Tap one to see what it needs, pick from the lists if it asks, and press Turn on. If your company has not made them available, the page says so.
In the web console
Open My assistant in the console (in Me, behind your photo at the bottom of the sidebar; it is shown to everyone who may use the assistant). It has the same controls as the app's assistant card:
- Call assistant is one big switch. Under it you see the state: off, on with the mode, paused until a time, or "Monthly minutes used up".
- How should it answer? shows the mode cards your company offers (Screen unknown, Smart, Business, Spam only, Do not disturb). One click changes the mode.
- Today shows how many calls the assistant handled, the outcome of each kind of call and, when your company sets a limit, the minutes used this month with a notice at 80 %.
- Pause stops the assistant for one hour or until tomorrow morning; Resume ends the pause.
- Caller's language has two switches: Answer in the caller's language (the assistant switches once the language is clear) and Also follow other common languages (Polish, Turkish, Arabic and others without built-in texts: your company's AI model translates what the assistant says; with it off, such a caller hears the assistant in your language). The second switch is on by default.
- Start from a template replaces your rules with a ready-made set.
- Screened calls lists the calls the assistant handled, newest first (the ones you have not opened are bold). Open one to read the conversation, then tell the assistant whether it got the call right: Correct, or Wrong with what should have happened. Mark all as read clears the new marks.
A call that is being screened shows a panel in the bottom corner of every console page, so you can step in wherever you are. It has the live words of the caller, what the call is about, and the buttons Answer, Voicemail, Reply, Ask more, Send to a colleague and Block, the same as in the app (see Following a call live). Reply and Ask more offer short ready-made lines you can edit; the text must be 160 characters or less and without links. When another device of yours decided first, the panel tells you so.
On the Mac and Windows app
The desktop app follows a screened call in three places:
- A panel over the app window with the live words, what the call is about and the same buttons as in the console (Answer, Voicemail, Reply, Ask more, Send to a colleague, Block), plus the assistant's question when it asks you what to do.
- The menu bar (macOS) or tray (Windows) shows "Assistant: talking to ..." while a call is screened, with Answer, Voicemail and Block, so you can act without opening the window. When no call is screened, the menu has Call assistant to turn it on or off and Pause assistant for 1 hour (or Resume assistant). These two entries appear when your company lets you use the assistant.
- A notification when the assistant starts talking to a caller and when it finishes, if the MonoPhone window is not in front. Clicking it brings the window up.
On the Apple Watch
The MonoPhone watch app has an Assistant page (shown when your company lets you use the assistant):
- Call assistant is the switch, with the state under it. Below it are today's count, the minutes used this month, the modes, Pause for 1 hour / Until tomorrow and Resume.
- Screened calls lists the latest calls with a one-line summary. Open one to mark it Correct or Wrong and say what should have happened.
- Live glance. While a call is screened, the top of the page shows who is calling, what it is about and the last three lines of the conversation, with Answer, Voicemail and Block. If the assistant asks you a question, Ring me answers it.
- Notification actions. The alert for a screened call offers Answer, Voicemail and Block on the watch. The summary after the call offers Call back and Wrong.
The watch sends the same commands as the phone, and the first decision of any of your devices wins.
Quick toggles
- Home Screen and Lock Screen widget (iPhone): add the Call assistant widget. The small one shows the state ring and how many calls were handled today. The medium one adds the mode, the last screened call (who called and what it was about) and two buttons, one to turn the assistant on or off and one to Pause 1 h. The Lock Screen versions show the state and today's count, and the last call in the rectangular one. A tap opens My assistant. While the phone is locked, the caller's name and the summary are hidden.
- Focus (iPhone): in Settings > Focus, choose a Focus, tap Add Filter, pick MonoPhone and choose the Call assistant mode that Focus sets (for example Do not disturb during Sleep, Business during Work); the same filter can also set your status. Setting a mode also turns the assistant on. With Restore the previous mode when the Focus ends on (the default), the mode from before comes back when the Focus ends, and the assistant goes back to off if it was off; a mode you picked yourself in the meantime stays.
- iPhone (iOS 18 and later): add the Assistant control to Control Center, the Lock Screen or the Action button to turn it on or off with one press, and Assistant mode to open the mode cards.
- Siri and Shortcuts: "Turn on my assistant in MonoPhone", "Turn off my assistant in MonoPhone", "Set my MonoPhone assistant to Do not disturb", "Pause my assistant in MonoPhone" and "Last screened call in MonoPhone". They also work in the Shortcuts app and on the Action button.
- Android: add the Assistant tile to Quick Settings. A tap turns it on or off, a long press opens My assistant. On a locked phone you are asked to unlock first.
- Android widget: touch and hold the home screen, choose Widgets and add Assistant. It shows how the assistant stands (Screening, Off, Paused, or Calls ring normally), the mode, how many calls it handled today and the last screened call, with a switch button and Pause 1 h (which becomes Resume while it is paused). The caller's name is left out while the phone is locked, and the buttons then open My assistant instead of changing anything. Tap the widget itself to open My assistant.
- Android icon shortcuts and voice: touch and hold the MonoPhone icon and choose Assistant on/off or Pause assistant (one hour); the answer shows as a short message at the bottom of the screen. The phone's voice assistant understands "Open turn on call assistant in MonoPhone", "Open turn off call assistant in MonoPhone" and "Open pause call assistant in MonoPhone".
Follow the phone's Do not disturb (Android)
In Settings > Calls and audio, turn on Switch my assistant with Do not disturb. While the phone's Do not disturb is on, or a mode that turns it on (Bedtime, Driving, a schedule of your own), your assistant goes to the mode you chose under Mode while it is on (Do not disturb by default) and is turned on if it was off. When it ends, Switch back when it ends returns the assistant to the mode and the on or off state it had before, unless you changed it yourself in the meantime. No extra permission is needed. If the phone changes while MonoPhone is fully closed, the assistant follows the next time the app opens or wakes for a call. The assistant has to be set up once in My assistant first, and a mode your company does not allow is not offered. This is separate from Follow the phone's Do not disturb for your status; you can use both.
The first time, the assistant is set up in the app; after that the toggles change it without opening the app. A Focus before the first setup changes nothing.
How your calls reach the assistant
The assistant works like "forward on no answer". Depending on the mode, your phones ring for a few seconds first (up to 20; in Only spam they ring for 20 seconds) or the assistant answers at once. Your status still counts: when your status forwards calls to a colleague, a number or your mobile, that forward wins; when it sends calls to voicemail (for example Do not disturb), the assistant answers instead and takes the message.
These calls always ring you directly and never reach the assistant:
- VIP callers (the company's list and your own),
- calls from your own phones and your mobile,
- colleagues, unless you turned on Screen colleagues too,
- calls your assistant itself puts through to you.
If you are an executive with a personal assistant (a person), your personal assistant takes your calls first, as before; the call assistant does not answer those calls.
If the assistant cannot run (your company switched the AI off, your minutes for the month are used up, or a provider does not answer), your calls ring as they would without it.
When the assistant puts a caller through
When the rules say "ring me", the assistant keeps the caller on the line and rings your phones. The call shows as a screened call, and when you answer you first hear a short whisper with who is calling and why. Press 1 to take the call, or hang up and the assistant takes a message. In the MonoPhone app you can tap Answer instead: the call is connected without the whisper. When nobody answers, the caller is passed to your voicemail.
When the rules send a caller to a colleague, the assistant rings that colleague (or a ring group or queue of your company) with a short note of what the call is about. Decline and block puts the caller on your own blocked list for the number of days you chose; you can remove them there at any time.
Following a call live
While the assistant talks to a caller, MonoPhone shows it live: a notification (on the iPhone a time-sensitive alert, on Android a high-priority notification) opens the live screen with what the caller says, what the assistant understood (who, why, urgent or not) and what it is doing now. You can step in at any moment from any of your devices:
| Button | What happens |
|---|---|
| Answer | The assistant tells the caller it is putting them through and rings your devices. Your tap counts as the answer, so you skip the whisper and the key press. |
| Voicemail | The caller is passed to your voicemail. |
| Decline politely | The assistant thanks the caller and ends the call. |
| Block | The assistant declines the call and puts the caller on your blocked list (30 days unless you choose another length). |
| Reply with text | The assistant says your words to the caller, as you typed them or in its own words and the caller's language. Keep it short (160 characters, no links). |
| Send to a colleague | The caller is put through to a colleague, ring group or queue of your company. |
The first decision wins: if you tap Answer on your phone and Voicemail on your watch, the call is put through to you and the second tap is ignored. When one of your rules says Ask me live, the assistant tells the caller to hold on for a moment and asks you what to do; if you do not answer within about 20 seconds, it takes a message.
On an iPhone the live screen also appears as a Live Activity on the Lock Screen and in the Dynamic Island, with the caller, the state ("Listening", "Speaking", "Ringing you") and the Answer, Voicemail and Block buttons. The phone system starts and updates it itself, so it appears also when MonoPhone is closed (iPhone with iOS 17.2 or later; on earlier versions it starts when you open the app). Live Activities must be allowed in Settings > MonoPhone, and signing out of MonoPhone stops them. On Android the same call shows as an ongoing notification with the same buttons, and it disappears when the call ends. Tap either to open the live screen.
When the call is over you get a short notification with what it was about and what happened (if you keep the assistant's notifications on). It has three buttons: Call back, Reply (a text to the caller) and Wrong (opens the call so you can say what should have happened). Your company decides whether notifications show the caller's number and the summary.
Pause
You can pause the assistant for one hour or until tomorrow morning. While it is paused, your calls ring as they would without it.
When your administrator turned it on
An administrator can turn the assistant on for a whole department or the company. You then get a notification, Your assistant is on, and tapping it opens My assistant. If your administrator also locked it, the switch is greyed out and reads Turned on by your administrator, the other modes are greyed out and the pause buttons are hidden. Every other place that could switch the assistant off shows the same state and leaves it on: the Control Center and Lock Screen controls, Siri and Shortcuts, the widgets, the Android Quick Settings tile, a Focus filter and the phone's Do not disturb. You can still change the voice, the rules, the context note and the notifications. If your administrator does not lock it, you can switch it off or change it as usual.
Rules
Rules are an ordered list: the first rule that matches decides. A rule looks at who is calling (a contact, a VIP, a colleague, a number or prefix, an unknown, withheld or international number, a repeated caller, a suspected spam call), when (after hours, in a meeting, your status) or, once the assistant has asked, what the call is about (a delivery, a bank, sales, a school, a personal call and so on). The action can be: ring me, ring my mobile, ring a colleague, take a message, voicemail, say a short phrase and hang up, decline and block for a number of days, text the caller, offer a callback, ask me live, or hand the call to a company call flow (when your administrator allows it).
In the web console, My assistant > Rules is the same list as the app's Customise screen: move a rule up or down, switch it off, delete it, add one, and press Save rules. Back to my style's rules removes your own list so the rules of your style apply again. The console will not save a list without the urgent-caller rule, or with a rule that ends the call for unknown callers above it.
A caller who says the call is urgent always rings you: every rule list keeps that rule, and no rule that ends the call for unknown callers may come before it.
When the assistant gets a call wrong, mark it Wrong and pick what should have happened. After three such answers for the same kind of call in 30 days, the app suggests a new rule (for example "Delivery → ring me"), and keeps showing it until you add it or a rule already does that. The assistant never changes your rules by itself.
A suspected spam call is a call your carrier could not vouch for, a number on your company's spam list, or a number that several people of your company blocked. The assistant answers those at once instead of ringing you first.
Voice, language and wording
Pick a voice from your company's text-to-speech and listen to it before you save. The assistant greets callers in your language and can switch to the caller's language once it is clear (you can turn Follow the caller's language off, and, in the console, also stop it following languages that have no built-in texts). Callers do not hear that an assistant answers unless you turn on Announce the assistant, or your company always announces it.
The assistant asks few questions: three at most by default (you can choose one to five), and it never spends more than 90 seconds on a call. You can change any of its lines in your own words (plain text, at most 300 characters, no long numbers), and add a short note it may share, for example where to leave parcels.
Your contacts
The assistant already knows the company directory, your own contacts and the company phonebook. You can also let the app match your phone's contacts: the app sends only a fingerprint of each number, never the number itself, and you can remove them at any time.
History
Open Screened calls from the assistant card (or tap Screened by your assistant on a call in your call history or voicemail). The newest calls come first, with a dot on the ones you have not opened yet; use Only new to see just those or Mark all read. A call opens with a summary, what the assistant did and the conversation. Under Did your assistant get it right? tap Correct, or Wrong and choose what should have happened. From the same screen you can Call back or Block the caller.
Each call the assistant handled is listed with the caller, what it was about, what happened, a short summary and the conversation. Long numbers in the conversation are hidden. Only you see your own history.
Your company's privacy settings apply: when it does not keep call transcripts, only the summary and the outcome are saved. After the company's retention period (30 days unless your administrator changed it) the conversation, the summary and the caller's details are removed; the counters of the month stay.
Minutes
Your company sets how many screened minutes each user has per month (300 by default). You get a notice at 80 % and at 100 %; above the limit your calls ring normally until the next month.