Skip to main content

Wallboards and the kiosk wall

The wallboard is a live view of your queues made for a screen on the wall: callers waiting, the longest wait, service level and agents. There are two ways to show it. Signed-in people open the Wallboard page in the console. A TV or a spare computer with nobody signed in uses a kiosk link, a read-only address that you create and can revoke at any time.

The Wallboard page​

Team, Wallboard (/wallboard) is open to anybody who holds queues:read, for the queues their role lets them see. A person with a department-scoped role sees the queues of that department. The page needs no other permission.

It shows one tile per enabled queue:

FigureMeaning
WaitingCallers in the queue now
Longest waitHow long the oldest caller has waited
Service levelThe share of callers answered within the queue's target (Target: answered within N s), or No calls yet
Available agentsAgents who can take a call now, of N agents
Agent statesA count per state: Available, Busy, Paused, Wrap-up, Logged out
TodayHow many were answered and abandoned today, and the average wait

Two small graphs show the waiting calls and the longest wait over the last five minutes, with the current value and the peak.

Every figure also carries a word, OK, Warning or Critical, next to its colour, so the board can be read without relying on colour alone.

How fresh it is​

The page loads a snapshot when it opens (callers already waiting, each agent's state, today's answered and abandoned counts) and then follows live events. A line at the top tells you the state of the connection: Live data is on, Connecting to live data, Live data was lost, reconnecting or Not connected. A lost connection reconnects by itself. The service level is measured from the moment the page was opened, so a freshly opened page starts with No calls yet until the first call ends.

When an agent is logged out of a queue after missed calls, a note appears on the board: An agent was logged out of (queue name) after missed calls, which you can Dismiss.

Colours and thresholds​

Open Colours and thresholds to decide when a figure turns to Warning or Critical: waiting calls, longest wait in seconds, service level and the number of available agents. Waiting calls and longest wait turn at or above the number you set. Service level and available agents turn when they fall below it. Restore defaults puts the built-in numbers back. These settings are kept in your own browser, so each person and each screen has its own.

Your own wall: widgets and queues​

The same panel lets each person shape their wall. Under Shown on each tile untick what you do not need (Waiting, Longest wait, Service level, Available agents, Agents by state, Today). Under Queues on this wall tick the queues of your team to see only those; with none ticked every queue you may see is shown. Show everything puts all widgets and queues back. Like the thresholds, this is kept in your browser.

Full screen​

Choose Full screen to hide the page's menus and fill the screen, and Leave full screen (or press Escape) to come back.

The kiosk wall for a TV​

A kiosk shows the wallboard on a display without a sign-in. It is read only: whoever has the link can see the figures of the company's queues and nothing else, and cannot open any other page of the console.

Create a kiosk​

  1. Open Queue routing (/admin/queue-routing) under the call centre area and go to Wallboard kiosks. You need queues:read to see the list and queues:write for the whole company to create or change one.
  2. Enter a Name for the display, for example Front office TV.
  3. Valid for (days): a number of days from 1 to 3650, or leave it empty to keep the kiosk until you revoke it.
  4. Optionally fill in the Colour thresholds (optional) (waiting callers, longest wait and available agents, amber and red for each). Fill in all six numbers or none. Empty uses the defaults. With the six numbers you can also set the Service level amber and red levels in percent (defaults 90 and 80).
  5. Under Queues, tick the queues this display shows, for example the queues of one team. With none ticked it shows every queue of the company.
  6. Under Widgets, untick the figures the display should not show. At least one must stay.
  7. Choose Add kiosk.

The new address is shown once (Copy the address now. It is shown only once.). Copy it and open it on the display. If you lose it, revoke the kiosk and add a new one.

What the display shows​

For each queue, the widgets you chose: Waiting, Longest wait, Service level today (the share of today's callers answered within the queue's target), Agents logged in (of N), Available, On a call or wrap-up, Paused, Answered today, Abandoned today and Average wait, each with OK, Warning or Critical where it has a colour. The corner shows Live, Loading, Retrying or Access ended.

The display refreshes itself every 5 seconds. If the server cannot be reached it shows The wallboard could not be refreshed. Trying again. and keeps trying. If the kiosk has been revoked or has expired it shows This display's access has been revoked or has expired. Ask your administrator for a new kiosk link. and stops.

Manage kiosks​

The Wallboard kiosks table shows each kiosk's Name, how many Queues it shows (All when none were ticked), how many Widgets (All when every widget is on), its Status (Live or Revoked) and when it was Last used.

  • Edit changes the name, the thresholds, the queues and the widgets. The address stays the same.
  • Revoke ends the kiosk. The address stops working on the display's next refresh, within seconds.

Which one to use​

Wallboard pageKiosk wall
Who opens itSigned-in people with queues:readAnybody with the link
SeesThe queues the person is allowed to see, or the ones they tickedThe queues ticked for the kiosk, or all of them
Thresholds and widgetsPer browserPer kiosk, set by an administrator
EndsWhen the person signs outWhen you revoke it or it expires

Treat a kiosk link like a password: put it only on screens you control, and revoke it when a screen is retired. A supervisor who needs the same numbers on a phone can use the Wallboard tab of the MonoPhone app, described in Supervisor features in the MonoPhone app. For the permissions behind supervision see Supervisors: roles and permissions. Queues and their settings are in Queues and ring groups.